home *** CD-ROM | disk | FTP | other *** search
- Path: nnrp.info.ucla.edu!usenet
- From: KurtY@urfim.ucla.edu (Kurt Yamamoto)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: NEC CDR-25 CD-ROM...support CDDA?
- Date: Fri, 02 Feb 96 14:45:12 PST
- Organization: UCLA
- Message-ID: <4eu45q$13l6@saba.info.ucla.edu>
- References: <4eqolj$rgq@hobbes.compusult.nf.ca> <4etgod$41q@nyx10.cs.du.edu>
- NNTP-Posting-Host: 128.97.180.57
- Mime-Version: 1.0
- X-Newsreader: WinVN 0.93.9
-
- So the Reno does CDDA. If you don't mind my asking, what software
- do you use to get the data from the CD?
-
- Kurt
- KurtY@urfim.ucla.edu
- In article <4etgod$41q@nyx10.cs.du.edu>, rdavis@nyx10.cs.du.edu says...
- >
- >mworden@public.compusult.nf.ca (Mark Worden) writes:
- >
- >>If I understand it correctly, CDDA offers the ability to read data from
- >>an audio CD directly through the SCSI port and play it through the
- >>audio.device? If so, my next question is, Does the NEC CDR-25 external
- >>CD-ROM support this? If not, is there any fix for it?
- >
- >>Please e-mail me...
- >
- >=====
- >OK. Email going out too.
- >
- >I still own one CDR-25 ... I used to own two ...
- >I rather like the CDR-25, it works well on my A500, my A3000,
- >and (hiding face) my 386.
- >
- >But the CDR-25 is not SCSI 2, and therefore does NOT support.
- >CDDA. And my fix was simple. I replaced the CDR-25 on my A3000
- >with a ReNo, which is SCSI 2, and does do CDDA.
- >
- >--
- >rdavis@nyx.net Robert (Bob) Davis
- > Amateur Radio K0FPC
- > Emporia, Kansas
-
-